This page contains a listing of available variables under Materials pricing and sample pricing scripts for different technologies.

For a general overview of how Pricing Scripts work, read General Rules for Pricing Scripts.

Pricing to Capture Material Cost

The material is used to print both the part itself and support structures underneath it (when necessary). In case of some of the technologies, the inside of the part will not be filled with the material completely, but instead there will be a repetitive infill structure which will also be included in the material cost calculation.

General Form for Material Pricing Scripts

The basic form that we recommend for the Javascript code for calculating the material-related cost is:

let materialPrice = ;       // $/kg or €/kg
let materialDensity = ;     // g/cm^3
let supportPrice = ;        // $/kg or €/kg
let supportDensity = ;      // g/cm^3
let infill = ;              // number in [0,1]
let supportInfill = ;       // number in [0,1]
let wallThickness = ;       // mm

let materialUsed = Math.max((model.volume - model.area*wallThickness)*infill, 0) +
Math.min(model.area*wallThickness, model.volume);

let totalMaterialPrice = (materialUsed*materialDensity*materialPrice +
support.volume*supportPrice*supportDensity*supportInfill)*0.000001;

totalMaterialPrice;

Each variable can then be defined with a constant value or mathematical calculation using available variables from the 3YOURMIND model analysis (next section).

Technologies without Walls (SLS; DMLS, MJF)
If there is no wall, one needs to simply put wallThickness = 0 (for example, in SLS, DMLS and MJF all parts are 100% filled with material, hence there is no need to introduce the wallThickness variable).

Technologies without Support
If there are no support structures, one can either remove all variables containing the word "support" from the formula, or simply put supportInfill = 0.

Changing Units
If one decides to choose different units than given above, then it is necessary to appropriately convert the units in the formula. For example, when one changes the units from kg/cm^3 to g/mm^3, a factor of 0.000001 must be added into the formula.

Variables Defined by 3YOURMIND Model Analysis for Material Pricing

This listing are all variables that are derived from each uploaded 3D model.

Variable	Description
`model.volume`	Volume of the 3D model in mm³
`model.area`	Area of the 3D model in mm²
`model.h`	Height of the 3D model in mm
`model.w`	Width of the 3D model in mm
`model.d`	Depth of the 3D model in mm
`model.shells`	Number of separated shells in 3D model
`model.box`	Bounding box volume of the 3D model in mm³
`model.machine_volume` (deprecated in 4.11)	Convex hull volume of the model in mm³
`model.convex_hull_volume` (since 4.11)	Convex hull volume of the model in mm³
`model.concave_hull_volume` (since 4.11)	Concave hull volume of the model in mm³, calculated with a max edge length of 55mm
`support.volume`	Volume of the solid support structures in mm³
`support.area`	Area of the model connected to support structures in mm²
`item.quantity`	Quantity of the same geometry in the basket. (Because the pricing script define a unit price, this variable is needed for quantity-based discounts.
User Properties	See the variable listing under User Based Pricing Scripts

Sample Material Pricing Scripts

This section contains sample scripts based on specific technologies and materials.
These pricing scripts can be copied directly into the platform and the variables can be adjusted according to your specific workflow and pricing.

SLS (PA12)

let maxVolume = 380 * 284 * 380; // dimensions of the printer
let materialCost = 60;           // euro/kg
let density = 1.02;              // g/cm^3
let machineRate = 50;            // euro/hour
let maxPrintTime = 14;           // printing time of a full building chamber
let margin = 5;                  // total price is multiplied with margin

// Price calculation
let material = model.volume * materialCost * density * 0.000001;
let time = (model.convex_hull_volume * maxPrintTime) / maxVolume;
let price = margin * (material + time * machineRate);

// Last line must contain final price
price;

SLA (Accura ClearVue)

let materialCost = 120;          // euro/kg
let density = 1.12;              // g/cm^3
let machineRate = 32;            // euro/hour
let timePerSurface = 0.00001;    // h/mm^2 model’s surface
let margin = 5;                  // total price is multiplied with margin

// Price calculation
let materialVolume = model.volume + support.volume * 0.1; 
let material = materialVolume * materialCost * density * 0.000001;
let time = model.area * timePerSurface * machineRate;
let price = margin * (material + time);

// Last line must contain final price
price;

DMLS (Aluminum ALSI10MG)

let materialCost = 180;        //euro/kg
let density = 4.43;            //g/cm^3
let hourlyRate = 35;           //euro/hour
let scanningSpeed = 3000;      //mm/s
let laserDiameter = 0.1;       //mm
let layerHeight = 0.1;         //mm
let layerPreparationTime = 10; //s
let supportInfill = 0.1;       // 10%
let laserNumber = 1;           // Set number of lasers for multi-laser machines
let factor = 1;


// Price calculation
let materialVolume = model.volume + support.volume * supportInfill;

let recoatingTime = ((layerPreparationTime * model.h) / layerHeight) / item.quantity;
let printingSpeed = scanningSpeed * laserNumber * laserDiameter * layerHeight;

let machineTime = factor * (materialVolume / (printingSpeed) + recoatingTime) / 3600;

let price = hourlyRate * machineTime + density * materialVolume * materialCost / 1000000;

// Last line must contain final price
price;

Material Pricing Scripts based on Material Cost