This page documents the economical and technical assessment provided as default by 3YOURMIND. For assessments relying on custom scores and reporting, not all aspects of this documentation may apply.
Part information completeness
Part information completeness bar shows the percentage of filled out part properties.
Part information completeness bar takes into account economical and technical properties.
All properties (required and optional) of the used form are taken into account
When hovering over Show More the user is shown a list of not completed part properties.
Supported technologies and default outputs
By default, the provided economical and technical assessment supports a variety of different AM technologies:
Fused Deposition Modeling (FDM)
Selective Laser Sintering (SLS)
Direct Metal Laser Sintering (DMLS)
Wire Arc Additive Manufacturing(WAM)
Binder Jetting (BJ)
Multi-Jet Fusion (MJF)
When all the needed data is provided for a part, the following default outputs are generated for each technology:
Economical
Total Cost of Manufacturing
Lead Time Savings estimation
Total Savings estimation
All economical outputs can be viewed on a per unit or yearly basis.
Technical
Suitability of technology
Failed technology checks
Technical Assessment
To assess the different technologies in terms of their suitability to produce this part, multiple aspects of the part are checked against the characteristics and capabilities of each technology.
The performed checks include:
Suitability of the parts material class
Suitability of the parts overall size
Dimensions and volume
Wall thickness (requires 3D file)
For details on the performed checks and individual boundaries go to [..LINK….].
Economical Assessment
