This article detailed guide will showcase demonstrate how to add a new material materials to the database in case said , especially when the desired material is currently not available or available but under another either unavailable or listed under a different name.
Step 1. go to the admin panel by adding /admin after the .com
2. scroll all the way down until you find the header “Products”
3. after entering this section in the left right corner you will find a button saying “Add Product”
4. now begins the actual configuration. First you will : Access the Admin Panel
Append "/admin" to the URL after the ".com" to access the admin panel.
Step 2: Locate the "Products" Section
Scroll down to the end of the page until you spot the “Products” header.
Step 3: Initiate the Addition of New Material
Once you're in the "Products" section, look for the button labeled "Add Product" in the top right corner.
...
Step 4: Start Configuration
You are now ready to begin configuring your new material. First, you'll be asked for the following:
...
Title: This can be
...
provided in
...
multiple languages, and the slug will
...
auto-generate, so you
...
don't have to
...
For the Category you will be presented with a dropdown that fields several options:
...
IMPORTANT: selecting Plastic, Composite, Ceramic, Metal and Other without the “> x” after the name will not work. Those are just headers introducing the subsections. So always pick something like Other > Wood for example.
...
manually create it. Please note, the slug must be a unique value and so may need to be manually edited if the same slug is already in use elsewhere.
Category: You'll see a dropdown menu with numerous options.
...
| Info |
|---|
If you select "Plastic," "Composite," "Ceramic," "Metal," or "Other" without the “> x” suffix, it won't work as these are mere headers for the subcategories. So, always pick something like "Other > Wood," for example. |
Step 5: Input Basic Properties
...
| Note |
|---|
It's imperative to fill out the following sections: Technology, Material Form, Minimum wall thickness (critical), and Minimum wall thickness (optimal) . |
...
as otherwise the printability analysis of uploaded 3d files won’t work properly. |
Here's a quick rundown of the sections from top to bottom:Ticking is multicolor will designate the material as a material that can have more than one color
Tradename
Is Multicolor: This feature is currently non-functional.
Tradename: This is an internal datapoint
...
, not
...
disclosed to the customer
...
.
Is Colorable: Check this box if the material can
...
undergo coloring post
...
-processing.
Internal
...
Interal 3yd comment is also only internal data
Popularity will decide how far up or down the material will show up in the user panel when not sorted alphabetically
...
Identifier: This information is for internal use only.
Internal 3yd Comment: This information is also for internal use.
Material Form: Choose from Powder, Liquid, Filament, or Other
...
, depending on the material you
...
're configuring.
Critical and
...
Optimal Wall Thickness: These settings determine how the part will be
...
displayed in the part viewer when this material is selected.
Minimum
...
Gap (Critical and Optimal): These options currently serve no function.
Detail Richness: Here, you can set the detail level from 1 to 100
...
. This attribute will be visible to the customer in the advanced comparison within the user panel.
Popularity: This setting determines how high or low the material appears in the user panel
...
Last but not least we get to the Material Properties
...
when not sorted alphabetically.
Step 6: Define Material Properties
Finally, you will need to fill out the Material Properties. The options here are self-explanatory and can (like detail richness) all be found in the advanced comparison in the user panel: , just like the Detail Richness attribute.
...