...
Field Name | Description |
|---|---|
Enable redirect / Redirect target site | Send visitors to another organization instead of using this one. This can be used to redirect Users between (QA / Prod) Servers. |
Default unit | This setting will be used to set the unit for new users on the platform. Auto-detected means that the unit will be set based on the user's location. See also |
Hide Printing Service Selection | If enabled, then the step to select the printing service in the Basket will be skipped. For single supplier platforms, it makes sense to enable this flag to simplify the flow for end users. Furthermore, all references to the selected Service are hidden on the User Panel, e.g.
In case this flag is enabled on platforms with multiple services, then a service is selected automatically based on the cheapest price offered for the selected material. |
Ampi enabled Ampi reports enabled Ampi analytics enabled | If you want to use AMPI Decide on the currency of AMPI |
Erp enabled | User and Service Panels enabled |
Erp analytics enabled | Only on dedicated cloud or on-prem Enables the “Advanced Analytics” section on the Organization Panel and gives access to the dashboards that are part of the Professional package. |
Professional plus analytics enabled | Only on dedicated cloud or on-prem If “Erp analytics enabled” is already enabled then this option provides access to the Professional+ content of Analytics. |
Full access analytics enabled since 23.3 | Only on dedicated cloud or on-prem If “Professional plus analytics enabled” is already enabled then this option provides access to the Enterprise content of Analytics. |
Catalog enabled | Enables the Catalog in the user- as well as the service-panel. |
Show only Net-Prices for customers | If you want to only show Net-Prices you can hit a switch here to do so. It will make it required however for your customers to insert company, VAT-ID information into his address. |
Enable users to download optimized 3D files | Give your users the possibility to download optimized 3D files. |
Preferred due date visibility | Enabled a customer can set a date when he would like/need the print to be done. Can be set to hidden, required, or optional. |
CSV format for exports | Choose the default delimiter for all CSV exports within the platform.
|
...
Default unit - possible outcomes and configurations
When new users join or are invited to the platform, their profile default unit is set to either Millimeters (MM) or Inches depending on several factors. This is essential since the user profile unit influences the unit in which 3D files are uploaded. For example, if your organization primarily works with MM files, it would be inconvenient if users located in the U.S. have their profile set to Inches by default, leading to potential discrepancies in file uploading.
Here are the settings that affect the default unit assigned to new users:
Helm Chart Configurations
Two primary configurations in the Helm chart influence the default unit:
Automatic IP Detection: If enabled, the user's country (which influences the default unit) is determined based on their IP address. For on-premise deployments, this is usually disabled.
Default Country: This serves as a fallback option if Automatic IP detection is disabled or if IP detection fails.
Admin Panel Configuration
The "Default unit" field in the admin panel also affects the default unit for new users.
The following table provides an overview of how different combinations of these factors result in the unit set in the profile of new users.
Automatic IP detection | ON | OFF | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Default country | Germany (example) | United States (example) | Default unit) | Auto-detect | mm | Inch | Auto-detect | mm | Inch|||||||||||
Detected country based on IP | Germany (example) | United States (example) | not relevant | not relevant | no IP detection | no IP detection | no IP detection | ||||||||||||
Default unit | Auto-detect | mm | Inch | Auto-detect | mm | Inch | |||||||||||||
Resulting user profile unit for new users | MM | Inch | MM | Inch | Inch | MM | Inch | ||||||||||||
Please note that users can still manually change the unit in their profile. Existing users' unit setting remains unchanged by changes in the configuration.
Terms and Conditions
Field Name | Description |
|---|---|
Show terms conditions | Enable or disable whether terms and conditions will be shown during the user registration process. |
Signup Terms and Conditions | The text that will be shown and accepted during the user registration process. |
...