...
Machines
In the machine section, you will need to configure the URL(s) of the machine(s), give them a name of your choice, define their type, and provide a list of mes_service identifiers you want to send data to. Please refer to the tables below to see the configuration details of our supported machines/interfaces:
...
| Code Block |
|---|
{
"id": 1,
"url": "https://print.3yourmind.com/api/v2.0/machine/730/",
"token": "28c1610a1240ecc5e9eae9b2e3a0554e64e8eeaf"
} |
Configure the Aggregator in the admin panel (on-prem only)
For on-prem customers, the aggregator configuration can also be uploaded in the admin panel. To configure the aggregator through the admin panel follow the steps below at
Home › B3_Machine › Aggregator configurations
Click ADD AGGREGATOR CONFIGURATION
Select your Site
Paste the aggregator config into the Content field
Save
Wait for 20-30s and check for errors in the admin panel under Aggregator configuration errors. If the Error field is empty then the configuration is valid.
At this point, the Aggregator should have already pulled the new configuration and started reading data from the machines
5. Start the Aggregator
Make sure that the Aggregator is in the same network as each machine you want to connect to.
...
Login to the 3YOURMIND Platform with a user that has access to the Service Panel. If you do not have access to the service panel, please look at : Service Panel.
Open the Service Panel.
Go to Settings > Workstations.
Select the workstation that the machine should get connected to.
Select the machine in the Machine Connectivity section.
Click on Connect Machine.
...