...
Enter Settings > Agile MES Settings > Workstations to configure the printers and post-processing workstations on your shop floor. Settings are generic and there is no differentiation between printing and non-printing machinery.
Property | Description | Mandatory |
|---|---|---|
Name | The workstations name that is displayed in the MES scheduler view after setup. | yes |
Description | Storing any additional internal information, e.g. company specific ID, serial number, location etc. | no |
Materials | Allows the specification of all materials that are processable by this workstation. When scheduling jobs on a workstation, the scheduler checks if the selected parts match the workstations settings. Only parts requiring a material that is set in this field will be available for scheduling on this workstation. If no materials are selected at all, all parts can be scheduled regardless of their material. | no |
Max Dimensions (mm) | XYZ-dimensions of the workstations build volume, to be specified in mm. | yes |
Nesting Type | Depending on the technology used by the workstation, either use the entire 3D bounding volume or 2D bounding area for nesting. | yes |
Load Factor | Defines the usable volume/area of the build chamber by multiplying with a configurable factor. Setting the load factor below 100% will shrink, above 100% will enlarge the volume/area used for nesting artificially. | yes |
Workflows
Secondly, workflows need to be defined in the MES. Workflows consist of a number of steps that need to be carried out to produce a part according to the specified requirements. Each of the steps in a workflow can be linked to one, multiple or no workstations. If no workstation is specified for a step, jobs can not be scheduled for this particular step of the workflow. A workflow can be set as default for a specific material in the materials “General” section.
...
While setting up workflows and their steps, one can specify for every step if it should be listed on the production sheet, which can be exported as a .pdf from part and job detail as well as the parts list. Default step durations can be assigned to every workflow step, which will be used to automatically calculate estimated finish dates for parts. Workflows need to be assigned to parts. Before parts are associated with a workflow, no scheduling or part progression actions can be performed for this part.
...
Property | Description | Mandatory |
|---|---|---|
Name | The workflows name, this name is shown in the workflow dropdown when assigning a workflow to a specific part. | yes |
Description | Storing any additional internal information e.g. process descriptions. | no |
Step | Each step represents an action that needs to be carried out in order to produce the parts according to the specified needs. Each step can have one, multiple or no workstations assigned. Default step durations can be set per workflow step to calculate estimated finish dates for parts. Further it can be specified if a specific workflow step should be shown on the part production sheet. A typical workflow could be:
| yes |
File naming format
In the admin panel it is possible to set up a custom file naming rule for downloading part files. In order to set up your own custom file naming rule, go to Admin Panel > Fulfillment partner > Advanced Options > File naming format
...
The available variables for automatic file renaming are listed below:
part ID - only once orders are accepted and parts exist in MES
part name
part number
part quantity
part material
order number
order reference number
order created by
...